Steelmate SLC-2C Blind Spot Detection Lane Change Assist System

The Steelmate SLC-2C is an aftermarket Blind Spot Detection and Lane Change Assist System that detects and warns you of vehicles that may not be visible in your mirrors. This greatly reduces the possibility of a fatal accident caused when overtaking or changing lanes using just a single-sensor on the rear of the vehicle and two visual displays on the dashboard that are extremely discreet and don’t compromise the look of your vehicle.

Key Features

✔ Powerful 77GHz single-sensor for easier installation
✔ Ultrahigh frequency detection with high resolution and fast response speed
✔ 30 meters ultra long-distance detection
✔ IP67 waterproof compact-size sensor
✔ Multi-level detection and warning
✔ Self-test function when ignition first switched on
✔ 2 installation bracket options
✔ 1 year warranty

How Does It Function?

BSD (Blind Spot Detection) – Up to 8 metres: If a vehicle is detected in the blind spot when not indicating, the corresponding warning light installed on the bottom of the left/right windscreen pillar trim will solidly illuminate amber and will stay illuminated until the vehicle exits the blind spot. If a vehicle is detected in the blind spot when indicating, the corresponding warning light installed on the bottom of the left/right windscreen pillar trim will illuminate red and an audible alert will sound until the vehicle exits the blind spot.

CVW (Closing Vehicle Warning) – Up to 30 metres: When a fast approaching (closing) vehicle is detected when not indicating, the corresponding warning light installed on the bottom of the left/right windscreen pillar trim will flash amber. When a fast approaching (closing) vehicle is detected when indicating, the corresponding warning light installed on the bottom of the left/right windscreen pillar trim will flash red and an audible alert will sound.

Technical Specifications

ECU operating voltage: 9-16V
ECU operating current: <250mA (system)
Sensor operating frequency: 77-79GHz
Sensor installation height: ≥50cm/≥1.6ft
Maximum detection range: ≤50m/≤164ft
Cable lengths from ECU to displays: Approx 5.9m and 7.4m