Microwave blind spot detection system utilizing 79GHz high-frequency technology.
The Steelmate SBS-1 blind spot detection system uses microwave sensors installed behind the rear bumper (one on each side) to warn the driver when a vehicle is in their blind spot.
When a vehicle is detected in the drivers blind spot the systems corresponding LED warning indicator (installed on the bottom of the windscreen pillar trims) will flash, if the driver is about to change lanes and is indicating an audible alert will sound. The system greatly reduces the possibility of a fatal accident caused while overtaking or changing lanes.
Significantly reduces the risk of an accident when changing lanes on a motorway or dual carriageway
Detects vehicles in your blind spot that approach and pass you in either the left or right lane when indicating
Visual and audible alarm
Optimized vehicle detection algorythms
Suitable for 12v/24v vehicles
Current consumption <300mA
Cable lengths from ECU to displays approx 5.5 m and 6.5 m
2 x 79GHz microwave
IP67 – waterproof
No holes to drill for sensors
Detection range up to 5m
Mounting height 55cm (+/- 10cm)
Range of use (difference in vehicle speeds (relative speed): from 3.1 mph to 24 mph)
Included In The Kit:
2 x Microwave sensors
1 x ECU
1 x ECU wiring loom
1 x Visual display wiring loom
2 x Visual displays (left & right)
2 x Magnets
2 x Alcohol wipes
1 x Self adhesive pad
1 x User Manual
Only logged in customers who have purchased this product may leave a review.