Product Sections
New Products
RX180 LED Daytime Running Lights
Input voltage: DC10>30V
Low power consumption
Lifetime: >50,000 hrs
find out more
RX250 LED Daytime Running Lights
Input voltage: DC10>30V
Low power consumption
Lifetime: >50,000 hrs
find out more
Driving Video Recorder
Key features:
Automatically records when ignition is on with G-force sensor
Synchronous video replay and recording
Manually start/stop recording quickly
Replay video at any time
Date and time shown on video
Built-in lithium battery for power protection
Cycle recording
Technical Parameters:
Image Sensor: CMOS
Lens: high-definition wide-angle lens
Effective Pixels: 640 x 480
Frame rate: 25f/S
Recording mode: MP4, or AVI format
Video break: 120mS
Memory: Micro SD card 128MB>32GB
Operating voltage: 9>16V
find out more
PTSV404 Matt Black Sensors
4 Sensor Rear Kit With Camera And Monitor
Main Features:
4 rear sensor system with camera and 3" high resolution TFT monitor
Parking assist lines on monitor for safe parking
Accurate digital distance & rearview image on monitor
Low light camera with wide angle
Self-test for damaged sensor
Clock or calendar option
Anti-false alert technology
Voice/audible alert selectable, volume adjustable
Technical Parameters:
For Parking Assist System:
Input voltage: 10>16V DC
Operating current: <250mA
Detection range: 0.1>2.5m
Display range: 0.3>2.5m
Operating temperature: -40°C>+85/-40°C>+185°C
For rearview camera:
Video standard: PAL
Minimum illumination: 1.5 Lux
Angle: H100°*V85°
Operation temperature: -30°C>+85°C/-22°C>+185°C
For TFT monitor:
Size: 3 inch
Input voltage: 9>16V DC
Operating current: <250mA
Operating temperature: -20°C>+60°C/-4°C>+140°C
Beep volume: 70>90dB
find out more
High Level Brake Light Warning Device
The high level brake light warning device is designed to attract the attention of drivers following your vehicle while braking. When you apply your footbrake, the high level brake light will blink quickly 4 times, followed by 3 slow flashes, after this the brake light will stay on until the footbrake is released.
Designed for cars with tungsten or halogen bulb
Alert following drivers' attention
Reduce following driver's reaction time
Wide input voltage range: 8>30VDC
Significantly reduce rear-end collisions
Universal for all vehicles
No interference with other electronic systems within the vehicle
Water resistant
find out more
PTS800EX Matt Black Sensors
8 Sensor Front And Rear Upgrade Kit With Buzzers. The system can be programmed to ignore protrusions such as nudge bars, tow bars and spare wheels, and is compatible with our visual display types listed in related products below. Can be used with only 2 sensors on the front or rear part of the kit.
Main Features:
8 sensor system, complete front and rear protection
Fully upgradeable to use one of our compatible visual displays
2 control units designed for luxury vehicles
Automatic radio mute function
Intelligent detection, compatible with spare tyre or metal bar (rear & front)
Anti-false alert technology
Can be used in different sensor combinations e.g. 2 front, 4 rear or 4 front, 2 rear etc
Detachable sensor with waterproof cable connectors
Self-test function
All weather design
Technical Parameters:
Voltage:12±3V
Operating temperature: -40oC~+85 oC
Input: <300mA
Beep volume: 70~90dB
Sensor installation height: 45~65cm
Range: Front: 0.3~1.0m
Rear: 0.3~2.5m
find out more
 Installation ImagesTo view the installation images Adobe Reader is required. If you need to download and install Adobe Reader (FREE) Click Here | ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
|
Think Safety Think Steelmate!
Main Pages
Best Sellers
PTSD1 Matt Black Sensors
4 Sensor rear only kit no display just audible tones. The system can be programmed to ignore tow bar or spare wheel. This is our value 4 Sensor kit audible only branded Ebat which comes with 3 years warranty (12 months as standard with 2 additional years given when you register your warranty details online) , the sensors are 20mm in diameter and have detachable cables. The power loom and buzzer are a one piece cable. A hole cutter is not included in the kit. Only available with matt black sensors.
Main Features:
Rear 4 sensors for full rear coverage
4-stage audible warning buzzer
Heavy rain proof design
All weather design (-40°C>+80°C)
Anti-false alarm patent
Easy installation
Technical Parameters:
Voltage: 9>16V
Temperature: -40>+80°C
Input: <4W
Beep volume: 70>90dB
Range (Rear): 0.3>1.5m
find out more
PTS400EX Matt Black Sensors
4 Sensor Rear Only Upgrade Kit With Buzzer. The system can be programmed to ignore tow bars or spare wheels and is compatible with our 6 visual display types listed in related products below. Can be used as a 2 Sensor system if required.
Main Features:
Rear 4 sensors for full rear coverage
4-stage audible warning buzzer with the option of adding a visual display
Heavy rain proof design
All weather design (-40°C>+80°C)
Anti-false alarm patent
Easy installation
Technical Parameters:
Voltage: 9>16V
Temperature: -40>+80°C
Input: <4W
Beep volume: 70>90dB
Range (Rear): 0.3>1.5m
find out more
PTS800EX Matt Black Sensors
8 Sensor Front And Rear Upgrade Kit With Buzzers. The system can be programmed to ignore protrusions such as nudge bars, tow bars and spare wheels, and is compatible with our visual display types listed in related products below. Can be used with only 2 sensors on the front or rear part of the kit.
Main Features:
8 sensor system, complete front and rear protection
Fully upgradeable to use one of our compatible visual displays
2 control units designed for luxury vehicles
Automatic radio mute function
Intelligent detection, compatible with spare tyre or metal bar (rear & front)
Anti-false alert technology
Can be used in different sensor combinations e.g. 2 front, 4 rear or 4 front, 2 rear etc
Detachable sensor with waterproof cable connectors
Self-test function
All weather design
Technical Parameters:
Voltage:12±3V
Operating temperature: -40oC~+85 oC
Input: <300mA
Beep volume: 70~90dB
Sensor installation height: 45~65cm
Range: Front: 0.3~1.0m
Rear: 0.3~2.5m
find out more
CAN Bus Speed Dependent Interface
Our CAN Bus speed dependent interface provides 2 Outputs, specifically designed for the control of our front parking systems from the vehicle's CAN Bus. A +12v controlled output is generated by the interface as soon as the vehicle's ignition is switched on, and switched off while the vehicle speed is above (approximately) 6 MPH.
In addition to the speed dependent output an IGN sense is also generated by the CAN Bus interface, useful in modern vehicles where a clean IGN sense is harder to find.
find out more
Visual Display M6
Visual display unit (Compatible with control units using the circuit board BRM066A and onwards). Suitable for mounting on the vehicles dashboard or rear roof lining. Compatible with our PTS400EX or PTS800EX kits.
The display comes without a cover so you can choose the cover colour and location type i.e dash mounted or rear roof mounted, covers are available in three colours, black, grey and beige.
find out more
Visual Display M7
Visual display unit (Compatible with control units using the circuit board BRM066A and onwards). Suitable for mounting on the vehicles dashboard. Compatible with our PTS400EX or PTS800EX kits.
find out more